Re: [PATCH v10 05/12] Input: wacom_i2c - Read the descriptor values

On Tue, Sep 21, 2021 at 2:35 PM Dmitry Torokhov
[off-list ref] wrote:

Hi Ping,

On Fri, Sep 17, 2021 at 01:43:18PM -0700, Ping Cheng wrote:

quoted

Hi Dmitry,

On Tue, Sep 7, 2021 at 10:55 PM Dmitry Torokhov
[off-list ref] wrote:

quoted

quoted

quoted

quoted

Yes, our firmware supports HID over I2C.  However, some of our
customers often do not want to use HID to handle our hardware; even
they don't install the generic HID driver neither.  In such case, we
need to distinguish what generation of our device customer's has. And
to do so, we check I2C HID descriptor even though the driver is not
working with HID driver components, but this one.  That is why I2C HID
descriptor is used there. It is called, but the situation with this
driver is not supposed to work as a HID device.

I would like to understand better why the customers do not want to use
HID.

Those customers normally run embedded Linux. Their hardwares have very
specific use cases. They don't need to support any other HID devices except
the Wacom i2c device.

quoted

There needs to be a _very_ strong reason to essentially duplicate

quoted

HID layer in a vendor driver and I inclined to say that such customers

would need to patch their kernels themselves.

They most likely don't want to duplicate HID layer. They just don't need
most of the HID layer code.

They just need touchscreen support. Plus stylus support. And maybe
battery support. And maybe something else down the road... And they need
to introduce DT and ACPI descriptors to be able to mould the behavior to
platform needs. Which is pretty much the purpose of HID layer.

I see your point.

quoted

quoted

wacom_i2c simplifies their deployment and
testing process. Most of those customers are very small companies...

And now please continue this train of thoughts and consider every touch
vendor. Wacom is not unique. We have Elan, Cypress, Weida, Goodix, etc.
etc. Vendor drivers were acceptable before we had I2C standard, but now
it is much better for everyone to share the efforts and use HID instead
of replicating it for every vendor.

And I agree with you that we should share our efforts on the main tasks.

However, with the same token of sharing efforts, I see the benefit of
merging this set of patches upstream. From the version number we can
tell the patchset has gone through at least 10 rounds of review and
update. Alistair has put a lot of effort to get this far (Thank you
Alistair for your time and effort!).

I am sorry, but the fact that a developer spent a lot of time writing
code can not be used as a justification for merging said code.

quoted

A few community developers have
also reviewed the patches. This set of patches thoroughly touched all
parts of the components that related to an input i2c driver, which is
much better than the original version. This patchset would be a great
starting point for vendors to create their out of tree drivers, when
necessary. It would also offer vendors a clear picture of what
components they need to change/update to make their i2c input device
work under kernel input subsystem.

And they can do that by looking at the mailing list archive and they can
also follow this discussion and see why what they are doing is quite
wrong. I mean, why would they stop at dropping HID only? Why not bypass
I2C system as well and poke at the I2C controller directly. Skip PCI as
well?

quoted

So, merging the patchset will benefit more people and preserve the
effort that went into the patchset so far. If you like, you can add a
comment in the patch mentioning that future effort should be directed
to the i2c-hid subsystem, etc...

No, we should not merge the patch set that we agreed is wrong in its
approach. Maybe if I (and other community reviewers) realized that the
device was HID compliant we could stop this effort earlier, but
unfortunately it did not happen, so effort was wasted, but this happens
sometimes.

Should I prepare a patch to remove the wacom I2C driver entirely then?

Alistair

Thanks.

--
Dmitry