[PATCH 19/40] mfd: ti_am335x_tscadc: Always provide an idle configuration
STALE1856d
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: 2021-08-25 15:34:09
Also in:
linux-clk, linux-devicetree, linux-iio, linux-omap
Subsystem:
multifunction devices (mfd), the rest · Maintainers:
Lee Jones, Linus Torvalds
Revision v1 of 5 in this series.
Revisions (5)
The idle register is valid no matter if the touchscreen is used or not, let's always configure it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mfd/ti_am335x_tscadc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 258199be4c6a..7071344ad18e 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c@@ -218,16 +218,16 @@ static int ti_tscadc_probe(struct platform_device *pdev) ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID; regmap_write(tscadc->regmap, REG_CTRL, ctrl); - /* Set register bits for Idle Config Mode */ if (tsc_wires > 0) { tscadc->tsc_wires = tsc_wires; if (tsc_wires == 5) ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB; else ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB; - tscadc_idle_config(tscadc); } + tscadc_idle_config(tscadc); + /* Enable the TSC module enable bit */ ctrl |= CNTRLREG_TSCSSENB; regmap_write(tscadc->regmap, REG_CTRL, ctrl);
@@ -318,12 +318,12 @@ static int __maybe_unused tscadc_resume(struct device *dev) ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB; else ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB; - tscadc_idle_config(tscadc); } ctrl |= CNTRLREG_TSCSSENB; regmap_write(tscadc->regmap, REG_CTRL, ctrl); regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div); + tscadc_idle_config(tscadc); return 0; }
--
2.27.0