Thread (3 messages) 3 messages, 2 authors, 2021-08-30

Re: [RFC PATCH vs 2/4] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver

From: <hidden>
Date: 2021-08-30 13:00:35
Also in: lkml

On Fri, 2021-08-20 at 14:07 -0400, Charles Mirabile wrote:
quoted hunk ↗ jump to hunk
This patch implements support for the joystick.
It supports left/right/up/down/enter attached via i2c

Signed-off-by: Charles Mirabile <redacted>
Signed-off-by: Mwesigwa Guma <redacted>
Signed-off-by: Joel Savitz <redacted>
---
 drivers/input/joystick/Kconfig             |   8 ++
 drivers/input/joystick/Makefile            |   1 +
 drivers/input/joystick/sensehat-joystick.c | 124 +++++++++++++++++++++
 3 files changed, 133 insertions(+)
 create mode 100644 drivers/input/joystick/sensehat-joystick.c
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 3b23078bc7b5..d2f78353b74c 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -399,4 +399,12 @@ config JOYSTICK_N64
 	  Say Y here if you want enable support for the four
 	  built-in controller ports on the Nintendo 64 console.
 
+config JOYSTICK_SENSEHAT
+	tristate "Raspberry Pi Sense HAT joystick"
+	depends on GPIOLIB && INPUT
+	select MFD_SENSEHAT_CORE
+
+	help
+	  This is the joystick driver for the Raspberry Pi Sense HAT
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 5174b8aba2dd..39c8b5c6e5ae 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_JOYSTICK_N64)		+= n64joy.o
 obj-$(CONFIG_JOYSTICK_PSXPAD_SPI)	+= psxpad-spi.o
 obj-$(CONFIG_JOYSTICK_PXRC)		+= pxrc.o
 obj-$(CONFIG_JOYSTICK_QWIIC)		+= qwiic-joystick.o
+obj-$(CONFIG_JOYSTICK_SENSEHAT)         += sensehat-joystick.o
 obj-$(CONFIG_JOYSTICK_SIDEWINDER)	+= sidewinder.o
 obj-$(CONFIG_JOYSTICK_SPACEBALL)	+= spaceball.o
 obj-$(CONFIG_JOYSTICK_SPACEORB)		+= spaceorb.o
diff --git a/drivers/input/joystick/sensehat-joystick.c b/drivers/input/joystick/sensehat-joystick.c
new file mode 100644
index 000000000000..4aca125bc29d
--- /dev/null
+++ b/drivers/input/joystick/sensehat-joystick.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Raspberry Pi Sense HAT joystick driver
+ * http://raspberrypi.org
+ *
+ * Copyright (C) 2015 Raspberry Pi
+ * Copyright (C) 2021 Charles Mirabile, Mwesigwa Guma, Joel Savitz
+ *
+ * Original Author: Serge Schneider
+ * Revised for upstream Linux by: Charles Mirabile, Mwesigwa Guma, Joel Savitz
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/sensehat.h>
+
+static unsigned char keymap[] = {KEY_DOWN, KEY_RIGHT, KEY_UP, KEY_ENTER, KEY_LEFT,};
I'm not sure devices outputing KEY_* events fits input/joystick. Maybe
input/misc or input/keyboard? Or else use 'BTN_DPAD_UP/DOWN/LEFT/RIGHT'. Which
is what game controllers seem to do.

Regards,
Nicolas

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help