Re: [PATCH v3 1/6] dt-bindings: input: add Qualcomm SPMI haptics driver

On Mon, 16 Aug 2021 22:19:55 +0000, Caleb Connolly wrote:

Add bindings for qcom PMIC SPMI haptics driver.

Signed-off-by: Caleb Connolly <redacted>
---
 .../bindings/input/qcom,spmi-haptics.yaml     | 128 ++++++++++++++++++
 include/dt-bindings/input/qcom,spmi-haptics.h |  32 +++++
 2 files changed, 160 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml
 create mode 100644 include/dt-bindings/input/qcom,spmi-haptics.h

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/input/qcom,spmi-haptics.example.dt.yaml:0:0: /example-0/pmic@3: failed to match any schema with compatible: ['qcom,pmi8998', 'qcom,spmi-pmic']
Documentation/devicetree/bindings/input/qcom,spmi-haptics.example.dt.yaml:0:0: /example-0/pmic@3: failed to match any schema with compatible: ['qcom,pmi8998', 'qcom,spmi-pmic']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1517351

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.