Re: [PATCH] Input: elo - fix an error code in elo_connect()
flat view
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: 2021-02-17 04:39:09
Also in:
kernel-janitors
Hi Dan, On Thu, Jan 28, 2021 at 12:35:51PM +0300, Dan Carpenter wrote:
If elo_setup_10() fails then this should return an error code instead of success.
Thank you for the patch.
quoted hunk ↗ jump to hunk
Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens") Signed-off-by: Dan Carpenter <redacted> --- drivers/input/touchscreen/elo.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index e0bacd34866a..4b2fb73da5e2 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c@@ -341,8 +341,10 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv) switch (elo->id) { case 0: /* 10-byte protocol */ - if (elo_setup_10(elo)) + if (elo_setup_10(elo)) { + err = -EINVAL;
Ideally we'd propagate error from elo_setup_10() and underlying code, but we are not ready for it, as most serio code simply uses -1 for errors. However I think that -EIO would suit better here. Please let me know if you disagree, otherwise I'll fix it up on my side. Thanks!
goto fail3; + } break; -- 2.29.2
-- Dmitry