Re: [PATCH] HID: multitouch: add a quirk to skip set inputmode for 2 new laptops

Hi


2021. január 7., csütörtök 12:27 keltezéssel, Hui Wang írta:

we have 2 latest Thinkpad laptops, the synaptics trackpoint module is
connected to i8042 bus and the synaptics touchpad module is on the i2c
bus. The trackpoint is driven by input/mouse/trackpoint.c and the
touchpad is driven by hid-multitouch.c.

They all work well independently, but if users press any buttons of
trackpoint and meanwhile move finger on the touchpad, the touchpad
can't work, the i2c bus can't generate interrupts even. That is to say
the touchpad can't work with trackpoint together, once trackpoint
works, the touchpad stops working.

The current hid driver parses the device descriptor and selects the
hid-multitouch.c and applies the MT_CLS_WIN_8 to the touchpad, I found
this issue begins to happen after the driver sets the
MT_INPUTMODE_TOUCHPAD to the device, If skipping to set it, the
touchpad work well and doesn't have that issue, even after suspend and
resume, the touchpad still work well.

This touchpad module doesn't support multi inputmodes, and its init
mode is set by BIOS already, it is safe to skip to set it again in
the kernel driver.
[...]

Assuming I'm not missing anything obvious, a windows precision touchpad
should revert back to reporting events via its HID compliant mouse collection
when power cycled or reset by the host[1].

Doesn't that imply that the events will be reported via the mouse collection
in this case, and that the multi-touch capabilities of the device will not
be usable? Or am I missing something?


[1]: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-precision-touchpad-required-hid-top-level-collections#input-mode-feature-report


Regards,
Barnabás Pőcze