Hi Marco,
On Wed, Jul 29, 2020 at 09:55:13AM +0200, Marco Felsch wrote:
Hi,
On 20-07-23 10:43, Horia Geantă wrote:
quoted
From: André Draszik <redacted>
The snvs_pwrkey shares the SNVS LPSR status register with the snvs_rtc.
This driver here should only return IRQ_HANDLED if the status register
indicates that the event we're handling in the irq handler was genuinely
intended for this driver. Otheriwse the interrupt subsystem will
assume the interrupt was handled successfully even though it wasn't
at all.
After checking the RM and the imx6qdl.dtsi I'm not very sure that this
is right since the snvs-powerkey has a seperate irq-line. So we can be
sure that this irq is for us. If this is the case we don't need to check
the SNVS_LPSR_REG instead we only need to clear it.
Wouldn't we want to know if for some reason we get spurious interrupts?
Thanks.
--
Dmitry