[PATCH v3 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios
From: Ondrej Jirman <hidden>
Date: 2020-07-02 11:21:02
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
It is possible to turn the motor on/off just by enabling/disabling the vcc-supply. Change the binding to require either enable-gpios or vcc-supply or both. Signed-off-by: Ondrej Jirman <redacted> --- Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index 2384465eaa19..082ac06471db 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml@@ -24,7 +24,12 @@ properties: required: - compatible - - enable-gpios + +anyOf: + - required: + - enable-gpios + - required: + - vcc-supply additionalProperties: false
--
2.27.0