Re: [PATCH] Input: mms114: don't report 0 pressure while still tracking contact(s)

On Fri, Jun 12, 2020 at 07:46:19PM +0200, Denis 'GNUtoo' Carikli wrote:

On Sat, 6 Jun 2020 11:18:06 -0700
Dmitry Torokhov [off-list ref] wrote:

quoted

Hi Denis,

Hi,

quoted

Could you please post longer sequence from evtest leading to the
packet with 0 pressure?

Here's the full sequence, of a slide from the botton to the top, I hope
that it's not too long:

[...]

quoted

Properties:
  Property type 1 (INPUT_PROP_DIRECT)
Testing ... (interrupt to exit)
Event: time 1585880998.920994, type 3 (EV_ABS), code 57
(ABS_MT_TRACKING_ID), value 0 Event: time 1585880998.920994, type 3
(EV_ABS), code 53 (ABS_MT_POSITION_X), value 400 Event: time
1585880998.920994, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y),
value 1262 Event: time 1585880998.920994, type 3 (EV_ABS), code 48
(ABS_MT_TOUCH_MAJOR), value 6 Event: time 1585880998.920994, type 3
(EV_ABS), code 58 (ABS_MT_PRESSURE), value 90 Event: time
1585880998.920994, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 1
Event: time 1585880998.920994, type 3 (EV_ABS), code 0 (ABS_X), value
400 Event: time 1585880998.920994, type 3 (EV_ABS), code 1 (ABS_Y),
value 1262 Event: time 1585880998.920994, type 3 (EV_ABS), code 24
(ABS_PRESSURE), value 90 Event: time 1585880998.920994,
-------------- SYN_REPORT ------------ Event: time 1585880998.943145,

sorry, but this is completely unreadable. Please make sure it's in the
originally formatting that evtest/evemu/libinput record spit out. Thanks.

Cheers,
   Peter