Thread (7 messages) 7 messages, 3 authors, 2020-06-09

Re: [PATCH 0/2] Add SW_MACHINE_COVER key

From: Merlijn Wajer <hidden>
Date: 2020-06-09 00:22:43
Also in: linux-devicetree, linux-omap, lkml

Hi,

A while later (again) - any thoughts/comments?

Should I resend the series?

Thanks,
Merlijn

On 15/04/2020 15:29, Merlijn Wajer wrote:
Hi,

Any objections or further comments on these two patches? It's been a while.

Cheers,
Merlijn

On 15/02/2020 18:02, Merlijn Wajer wrote:
quoted
this series adds the sw_machine_cover key, and changes the nokia n900 dts to
expose the key via gpio-keys.

before, this gpio was used as card detect gpio, causing the card not to show up
if the phone was booted without cover, see this thread on linux-omap:

    n900: remove mmc1 "safety feature"? (was: re: mmc0 on nokia n900 on linux 5.4.18)

since there is no realistic use for using this gpio as card detect, instead
expose it to userspace via gpio-keys. there are no event type for machine covers
yet, so add that first.

the key should be 1 when the cover is closed, and 0 when the cover is open.

starting the nokia n900 with the cover removed, putting the cover in place:

    event: time 1581684523.415296, type 5 (ev_sw), code 16 (?), value 1

removing the cover again, exposing mmc1 and the battery:

    event: time 1581684529.413706, type 5 (ev_sw), code 16 (?), value 0

Merlijn Wajer (2):
  Input: add `SW_MACHINE_COVER`
  ARM: dts: n900: remove mmc1 card detect gpio

 arch/arm/boot/dts/omap3-n900.dts       | 12 ++++++++----
 include/linux/mod_devicetable.h        |  2 +-
 include/uapi/linux/input-event-codes.h |  3 ++-
 3 files changed, 11 insertions(+), 6 deletions(-)
  

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help