Re: [PATCH v2 1/2] Input: mms114 - add support for mms345l
From: Stephan Gerhold <stephan@gerhold.net>
Date: 2020-04-10 10:33:13
Also in:
linux-devicetree
Hi Dmitry, On Thu, Apr 09, 2020 at 03:15:03PM -0700, Dmitry Torokhov wrote:
Hi Stephan, On Sun, Apr 05, 2020 at 07:09:03PM +0200, Stephan Gerhold wrote:quoted
MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152. However, using I2C_M_NOSTART for it causes errors when reading: i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5) The driver works fine as soon as I2C_M_NOSTART is removed. Add a separate melfas,mms345l binding, and make use of I2C_M_NOSTART only for MMS114 and MMS152. Reviewed-by: Andi Shyti <redacted> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>Sorry for sitting on this for so long. I looked around, and I think that instead of adding separate handling for 345L we shoudl simply drop the "no start" bit for everyone. I am not sure what the original version tried to do here, as far as I can see in various public Android trees the driver for these devices does not use I2C_M_NOSTART. Actually, I wonder if the difference is not in the touch controller that is being used, but rather in the I2C controller the device in connected to. I would like to apply the version of the patch below.
Thanks a lot for your reply! Your suggested patch below works fine on my MMS345L device (with the melfas,mms152 compatible). Applying it would allow the touchscreen to work on my device in mainline :) I wonder if we should still add a separate melfas,mms345l compatible: The only remaining difference to MMS152 at the moment is the MMS152_COMPAT_GROUP register. It seems to be used for something different on MMS345L, so when it is printed in mms114_get_version() it just displays some garbage: TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06 (It used to actually print it as some ASCII control character but apparently that was fixed...) It's not really critical, but in case we find more differences I think it's better to directly add a separate compatible string to the device tree. If you agree with this I can send a separate patch with the new compatible string once you have applied the patch below. Thanks again! Stephan
quoted hunk ↗ jump to hunk
Input: mms114 - fix handling of mms345l From: Stephan Gerhold <stephan@gerhold.net> MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152. However, using I2C_M_NOSTART for it causes errors when reading: i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5) The driver works fine as soon as I2C_M_NOSTART is removed. Reviewed-by: Andi Shyti <redacted> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net (local) Patchwork-Id: 11474771 [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/input/touchscreen/mms114.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index 69c6d559eeb0..2ef1adaed9af 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c@@ -91,15 +91,15 @@ static int __mms114_read_reg(struct mms114_data *data, unsigned int reg, if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL) BUG(); - /* Write register: use repeated start */ + /* Write register */ xfer[0].addr = client->addr; - xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART; + xfer[0].flags = client->flags & I2C_M_TEN; xfer[0].len = 1; xfer[0].buf = &buf; /* Read data */ xfer[1].addr = client->addr; - xfer[1].flags = I2C_M_RD; + xfer[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; xfer[1].len = len; xfer[1].buf = val;@@ -428,10 +428,8 @@ static int mms114_probe(struct i2c_client *client, const void *match_data; int error; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_PROTOCOL_MANGLING)) { - dev_err(&client->dev, - "Need i2c bus that supports protocol mangling\n"); + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "Not supported I2C adapter\n"); return -ENODEV; }