* Dmitry Torokhov [off-list ref] [200306 19:11]:

On Fri, Feb 28, 2020 at 09:12:23AM -0800, Tony Lindgren wrote:

quoted

We only have partial errata i689 implemented with Commit 6c3516fed7b6
("Input: omap-keypad - fix keyboard debounce configuration"). We are
still missing the check for lost key-up interrupts as described in the
omap4 silicon errata documentation as Errata ID i689 "1.32 Keyboard Key
Up Event Can Be Missed":

"When a key is released for a time shorter than the debounce time,
 in-between 2 key press (KP1 and KP2), the keyboard state machine will go
 to idle mode and will never detect the key release (after KP1, and also
 after KP2), and thus will never generate a new IRQ indicating the key
 release."

Let's check the keyboard state with delayed_work after each event. And
if the problem state is detect, let's clear all events.

Cc: Arthur Demchenkov <redacted>
Cc: Merlijn Wajer <redacted>
Cc: Pavel Machek <redacted>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/input/keyboard/omap4-keypad.c | 56 ++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 6 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c

@@ -71,6 +71,8 @@ struct omap4_keypad {
 	void __iomem *base;
 	bool irq_wake_enabled;
 	unsigned int irq;
+	struct delayed_work key_work;
+	struct mutex lock;		/* for key scan */

I think having threaded interrupt and delayed work together defeats the
purpose of having threaded interrupt. If you want to add a delay before
repeating scan I think you can add it directly in
omap4_keypad_irq_thread_fn(). Or is there a concern that we will not
rely quickly enough on additional key presses? It is unclear to me if
additional key press within the debounce time will result in additional
interrupt.

Well if we wait in threaded interrupt, we won't see a new interrupt.
So yes, an additional key press will still produce an interrupt.

After a key press has been detected, we need to set a timer that checks
the keyboard controller state after it has idled. Then check for a
potentially stuck state, and clear all down events if the state is
idle with keys down.

I don't think we can really use runtime PM autosuspend delay here as we
already keep the device enabled with clock autogated so there's nothing
to do. If we now added runtime PM calls, we'd end up in mode with
clocks completely disabled. Maybe some tinkering of usage counts in
the interrupt handler would allow using PM runtime though :)

Regards,

Tony