[RFC PATCH 2/2] ARM: dts: n900: remove mmc1 card detect gpio
From: Merlijn Wajer <hidden>
Date: 2020-02-14 13:01:13
Also in:
linux-devicetree, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Instead, expose the key via the input framework, as SW_MACHINE_COVER --- arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 7028a7cb2849..ed773e1609a5 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts@@ -108,6 +108,14 @@ linux,code = <SW_FRONT_PROXIMITY>; linux,can-disable; }; + + machine_cover { + label = "Machine Cover"; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ + linux,input-type = <EV_SW>; + linux,code = <SW_MACHINE_COVER>; + linux,can-disable; + }; }; isp1707: isp1707 {
@@ -805,10 +813,6 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; - /* For debugging, it is often good idea to remove this GPIO. - It means you can remove back cover (to reboot by removing - battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ }; /* most boards use vaux3, only some old versions use vmmc2 instead */
--
2.23.0