10.12.2019 04:23, Dmitry Osipenko пишет:

10.12.2019 03:19, Michał Mirosław пишет:

quoted

EKTF3624 as present in Asus TF300T tablet has touchscreen size encoded
in different registers.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
 drivers/input/touchscreen/elants_i2c.c | 77 ++++++++++++++++++++++++--
 1 file changed, 72 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 27aca3971da5..e60a5eb9fb37 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c

@@ -34,7 +34,7 @@
 #include <linux/input/touchscreen.h>
 #include <linux/input/mt.h>
 #include <linux/acpi.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>

@@ -42,6 +42,10 @@
 /* Device, Driver information */
 #define DEVICE_NAME	"elants_i2c"
 
+/* Device IDs */
+#define EKTH3500	0
+#define EKTF3624	1
+
 /* Convert from rows or columns into resolution */
 #define ELAN_TS_RESOLUTION(n, m)   (((n) - 1) * (m))
 

@@ -160,6 +164,7 @@ struct elants_data {
 
 	bool wake_irq_enabled;
 	bool keep_power_in_suspend;
+	u8 chip_id;
 
 	/* Must be last to be used for DMA operations */
 	u8 buf[MAX_PACKET_SIZE] ____cacheline_aligned;

@@ -434,7 +439,53 @@ static int elants_i2c_query_bc_version(struct elants_data *ts)
 	return 0;
 }
 
-static int elants_i2c_query_ts_info(struct elants_data *ts)
+static int elants_i2c_query_ts_info_ektf(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	int error;
+	u8 resp[4];
+	u16 phy_x, phy_y;
+	const u8 get_xres_cmd[] = {
+		CMD_HEADER_READ, E_INFO_X_RES, 0x00, 0x00
+	};
+	const u8 get_yres_cmd[] = {
+		CMD_HEADER_READ, E_INFO_Y_RES, 0x00, 0x00
+	};
+
+	/* Get X/Y size in mm */
+	error = elants_i2c_execute_command(client, get_xres_cmd,
+					   sizeof(get_xres_cmd),
+					   resp, sizeof(resp), 1,
+					   "get X size");
+	if (error)
+		return error;
+
+	phy_x = resp[2] | ((resp[3] & 0xF0) << 4);
+
+	error = elants_i2c_execute_command(client, get_yres_cmd,
+					   sizeof(get_yres_cmd),
+					   resp, sizeof(resp), 1,
+					   "get Y size");
+	if (error)
+		return error;
+
+	phy_y = resp[2] | ((resp[3] & 0xF0) << 4);
+
+	/* calculate resolution from size */
+	if (!ts->prop.max_x)
+		ts->prop.max_x = 2240;
+	ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, phy_x);
+
+	if (!ts->prop.max_y)
+		ts->prop.max_y = 1408;
+	ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, phy_y);
+
+	dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y);
+
+	return 0;
+}
+
+static int elants_i2c_query_ts_info_ekth(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
 	int error;

@@ -587,8 +638,20 @@ static int elants_i2c_initialize(struct elants_data *ts)
 		error = elants_i2c_query_test_version(ts);
 	if (!error)
 		error = elants_i2c_query_bc_version(ts);
-	if (!error)
-		error = elants_i2c_query_ts_info(ts);
+
+	switch (ts->chip_id) {
+	case EKTH3500:
+		if (!error)
+			error = elants_i2c_query_ts_info_ekth(ts);
+		break;
+	case EKTF3624:
+		if (!error)
+			error = elants_i2c_query_ts_info_ektf(ts);
+		break;
+	default:
+		unreachable();
+		break;
+	}
 
 	if (error)
 		ts->iap_mode = ELAN_IAP_RECOVERY;

@@ -1185,6 +1248,9 @@ static int elants_i2c_probe(struct i2c_client *client,
 	ts->client = client;
 	i2c_set_clientdata(client, ts);
 
+	if (client->dev.of_node)
+		ts->chip_id = (uintptr_t)of_device_get_match_data(&client->dev);
+
 	ts->vcc33 = devm_regulator_get(&client->dev, "vcc33");
 	if (IS_ERR(ts->vcc33)) {
 		error = PTR_ERR(ts->vcc33);

@@ -1422,7 +1488,8 @@ MODULE_DEVICE_TABLE(acpi, elants_acpi_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id elants_of_match[] = {
-	{ .compatible = "elan,ekth3500" },
+	{ .compatible = "elan,ekth3500", .data = (void *)EKTH3500 },
+	{ .compatible = "elan,ektf3624", .data = (void *)EKTF3624 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, elants_of_match);

It also should be possible to remove elants_of_match entirely and do the
following in the I2C ID table:

static const struct i2c_device_id elants_i2c_id[] = {
	{ "ekth3500", EKTH3500 },
	{ "ektf3624", EKTF3624 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, elants_i2c_id);

Then OF core will take care of device ID matching by removing the
"elan," part from the compatible value of the device-tree and comparing
it with the values in elants_i2c_id[].

And then in elants_i2c_probe() you could :

	chip->chip_id = (uintptr_t)id->driver_data;

See "drivers/mfd/max77620.c" for the example.

But maybe it's not really worth the effort at all since we need to
override the sizes in device-tree anyway?

What about to just ignore the firmware values of eKTF3624 for simplicity?