Re: [PATCH 1/2] HID: wacom: Don't set tool type until we're in range
From: Jason Gerecke <hidden>
Date: 2019-05-07 18:43:56
Also in:
stable
Haven't heard anything back from you about this patch set, Benjamin. Just making sure it doesn't get lost down a crack :) Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours.... On Wed, Apr 24, 2019 at 3:13 PM Gerecke, Jason [off-list ref] wrote:
quoted hunk ↗ jump to hunk
From: Jason Gerecke <jason.gerecke@wacom.com> The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point. In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen. Fixes: a48324de6d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: <redacted> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <redacted> --- drivers/hid/wacom_wac.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 747730d32ab6..4c1bc239207e 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c@@ -1236,13 +1236,13 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) /* Add back in missing bits of ID for non-USI pens */ wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF; } - wacom->tool[0] = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0])); for (i = 0; i < pen_frames; i++) { unsigned char *frame = &data[i*pen_frame_len + 1]; bool valid = frame[0] & 0x80; bool prox = frame[0] & 0x40; bool range = frame[0] & 0x20; + bool invert = frame[0] & 0x10; if (!valid) continue;@@ -1251,9 +1251,24 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->shared->stylus_in_proximity = false; wacom_exit_report(wacom); input_sync(pen_input); + + wacom->tool[0] = 0; + wacom->id[0] = 0; + wacom->serial[0] = 0; return; } + if (range) { + if (!wacom->tool[0]) { /* first in range */ + /* Going into range select tool */ + if (invert) + wacom->tool[0] = BTN_TOOL_RUBBER; + else if (wacom->id[0]) + wacom->tool[0] = wacom_intuos_get_tool_type(wacom->id[0]); + else + wacom->tool[0] = BTN_TOOL_PEN; + } + input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1])); input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3])); --2.21.0