[PATCH v5 1/4] dt-bindings: input: touchscreen: goodix: Document regulator properties
From: Jagan Teki <jagan@amarulasolutions.com>
Date: 2019-02-17 09:14:55
Also in:
linux-devicetree, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Goodix CTP controllers support analog, digital and gpio regulator supplies on relevant controller pin configurations. Out of which AVDD28 regulator is mandatory supplied regulator in most of the board designs, so document AVDD28 as required property and rest marked as optional regulators. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- .../devicetree/bindings/input/touchscreen/goodix.txt | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index f7e95c52f3c7..8f6e6eede64d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt@@ -23,6 +23,13 @@ Optional properties: - touchscreen-inverted-y : Y axis is inverted (boolean) - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) (swapping is done after inverting the axis) + - AVDD28-supply : Analog power supply regulator on AVDD28 pin + +Optional properties: + + - AVDD22-supply : Analog power supply regulator on AVDD22 pin + - DVDD12-supply : Digital power supply regulator on DVDD12 pin + - VDDIO-supply : GPIO power supply regulator on VDDIO pin Example:
--
2.18.0.321.gffc6fa0e3