[PATCH 3/3] input: dt-bindings: Add binding for bma150 sensor
From: Paweł Chmiel <hidden>
Date: 2019-01-25 18:44:20
Also in:
linux-devicetree, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Jonathan Bakker <redacted> Add device tree bindings for Bosch BMA150 Accelerometer Sensor Signed-off-by: Jonathan Bakker <redacted> Signed-off-by: Paweł Chmiel <redacted> --- .../bindings/input/bosch,bma150.txt | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/bosch,bma150.txt
diff --git a/Documentation/devicetree/bindings/input/bosch,bma150.txt b/Documentation/devicetree/bindings/input/bosch,bma150.txt
new file mode 100644
index 000000000000..290c60e38c70
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/bosch,bma150.txt@@ -0,0 +1,20 @@ +* Bosch BMA150 Accelerometer Sensor + +Also works for the SMB380 and BMA023 accelerometers + +Required properties: +- compatible : Should be "bosch,bma150" +- reg : The I2C address of the sensor + +Optional properties: +- interrupt-parent : should be the phandle for the interrupt controller +- interrupts : Interrupt mapping for IRQ. If not present device will be polled + +Example: + +bma150@38 { + compatible = "bosch,bma150"; + reg = <0x38>; + interrupt-parent = <&gph0>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; +};
--
2.17.1