Re: [PATCH 2/2] dt-bindings: Add I2C attached EETI EXC3000 bindings

On Fri, Oct 06, 2017 at 09:37:28AM +0200, Ahmet Inan wrote:

This documents the use of the dt-bindings for the EETI EXC3000 driver
with the following example configuration:

Using the I2C address 0x2a of the touch controller in the driver.

Using pin 9 as low level-sensitive interrupt to signal the driver.

Using a 4096x4096 touch screen resolution.

Inverting the x-axis and swapping the result with the y-axis.

Signed-off-by: Ahmet Inan <inan-T/gOFcTbiWqzQB+pC5nmwQ@public.gmane.org>
---
 .../bindings/input/touchscreen/exc3000.txt         | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.txt

Acked-by: Rob Herring <redacted>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html