Hi Jiri, Benjamin,

As discussed with myself in the linux-input thread about adding
icn8505 (ACPI HID CHPN0001) devices to the icn8313 driver:
https://www.spinics.net/lists/linux-input/msg51916.html

Unfortunately the ACPI node for this non HID compatible device has an
ACPI CID (compatility ID) of PNP0C50 causing the i2c-hid driver to bind,
which leads to the touchscreen not working (see the second patch
commit message for details).

Although these 2 patches are not really pretty I believe they are the
best way to fix this.

Note that even if I do add firmware upload support to the icn8318 driver,
we still have the issue left of i2c-hid doing a
dev_err(dev, "hid_descr_cmd failed") which is also undesirable.

A normal system bootup should have no output for "dmesg --level=err",
this is esp. important for the flickerfree boot experience both Fedora
and Ubuntu have been working towards. Any _err kernel messages will
cause the splash screen to drop back to text-mode breaking the
flickerfree experience. So to silence that error we would need to
blacklist the CHPN0001 ACPI HID somewhere in the i2c-hid driver
anyways.

Regards,

Hans