[PATCH 2/2] iio: Add linear accel sensor hid support
From: Song Hongyan <hidden>
Date: 2017-01-03 15:13:50
Also in:
linux-iio
Subsystem:
hid core layer, hid sensor hub drivers, iio subsystem and drivers, the rest · Maintainers:
Jiri Kosina, Benjamin Tissoires, Jonathan Cameron, Srinivas Pandruvada, Linus Torvalds
Linear acceleration is a soft sensor it differs from a standard accel sensor, it provides a three-dimensional vector representing acceleration along each device axis, excluding gravity. The sensor data is derives from standard accelerometer device by filtering out the acceleration which is caused by the force of Earth’s gravity. The value can be used to perform gesture detection, it can also serve as input to an inertial navigation system, which uses dead reckoning. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Linear accel sensor, gravity sensor and accelerometer have similar channels and share channel usage ids. So the most of the code for accel_3d can be reused. Signed-off-by: Song Hongyan <redacted> --- drivers/iio/accel/hid-sensor-accel-3d.c | 42 +++++++++++++++++++++++++++++++++ include/linux/hid-sensor-ids.h | 3 +++ 2 files changed, 45 insertions(+)
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 9edd574..6ce460f 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c@@ -91,6 +91,41 @@ struct accel_3d_state { }; /* Channel definitions */ +static const struct iio_chan_spec linear_accel_3d_channels[] = { + { + .type = IIO_LINEAR_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_X, + }, { + .type = IIO_LINEAR_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_Y, + }, { + .type = IIO_LINEAR_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_Z, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_Z, + } +}; + +/* Channel definitions */ static const struct iio_chan_spec gravity_channels[] = { { .type = IIO_GRAVITY,
@@ -354,6 +389,10 @@ static int hid_accel_3d_probe(struct platform_device *pdev) name = "accel_3d"; channel_spec = accel_3d_channels; channel_size = sizeof(accel_3d_channels); + } else if (hsdev->usage == HID_USAGE_SENSOR_LINEAR_ACCEL_3D) { + name = "linear_accel_3d"; + channel_spec = linear_accel_3d_channels; + channel_size = sizeof(linear_accel_3d_channels); } else { name = "gravity"; channel_spec = gravity_channels;
@@ -452,6 +491,9 @@ static int hid_accel_3d_remove(struct platform_device *pdev) { /* gravity sensor */ .name = "HID-SENSOR-20007b", }, + { /* linear_accel sensor */ + .name = "HID-SENSOR-20007c", + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(platform, hid_accel_3d_ids);
diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
index b6778fd2..b0b26a0 100644
--- a/include/linux/hid-sensor-ids.h
+++ b/include/linux/hid-sensor-ids.h@@ -55,6 +55,9 @@ /* Gravity vector */ #define HID_USAGE_SENSOR_GRAVITY_VECTOR 0x20007B +/* linear accel */ +#define HID_USAGE_SENSOR_LINEAR_ACCEL_3D 0x20007C + /* ORIENTATION: Compass 3D: (200083) */ #define HID_USAGE_SENSOR_COMPASS_3D 0x200083 #define HID_USAGE_SENSOR_DATA_ORIENTATION 0x200470
--
1.9.1