Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature

Hi Dmitry,

Am 27.12.2016 um 22:54 schrieb Dmitry Torokhov [off-list ref]:

On Mon, Dec 12, 2016 at 10:21:25PM +0100, H. Nikolaus Schaller wrote:

quoted

Hi,

quoted

Am 27.11.2016 um 16:47 schrieb H. Nikolaus Schaller [off-list ref]:

Hi Jonathan,

quoted

Am 27.11.2016 um 12:02 schrieb Jonathan Cameron [off-list ref]:

On 24/11/16 18:05, H. Nikolaus Schaller wrote:

quoted

quoted

Am 24.11.2016 um 18:38 schrieb Jonathan Cameron [off-list ref]:



On 22 November 2016 14:02:30 GMT+00:00, "H. Nikolaus Schaller" [off-list ref] wrote:

quoted

quoted

- hence cc'd Yann and the Kbuild list
to see if they can offer some advices.

no response / advice so far.

Since you are saying that IIO stuff is optional, add it to Kconfig
explicitly:

config "TOUCHSCREEN_TSC2007_IIO"
	bool "IIO interface for external ADC input and temperature"
	depends on TOUCHSCREEN_TSC2007
	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
	help
	  ...

and use this symbols in makefile:

and in Makefile:

obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
tsc2007-y := tsc2007-core.o ...
tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO) += tsc2007_iio.o

Ah, ok. Well, we tried to make it without an explicit config option
but it does not hurt to have one.

Your proposal works fine for 3 out of the 4 possible combinations.

I think it is unlikely that the combination TOUCHSCREEN_TSC2007=y IIO=m
is needed at all (we configure as much as possible as =m in our kernel).

Patch v9 will come next (where I have also moved this iio driver
patch to be 8/8).

BR and thanks,
Nikolaus