On Dec 05 2016 or thereabouts, Rob Herring wrote:
On Thu, Dec 01, 2016 at 09:24:50AM -0800, Brian Norris wrote:
quoted
Hi Benjamin and Rob,
On Thu, Dec 01, 2016 at 03:34:34PM +0100, Benjamin Tissoires wrote:
quoted
On Nov 30 2016 or thereabouts, Brian Norris wrote:
quoted
From: Caesar Wang <redacted>
Add a compatible string and regulator property for Wacom W9103
digitizer. Its VDD supply may need to be enabled before using it.
Signed-off-by: Caesar Wang <redacted>
Cc: Rob Herring <redacted>
Cc: Jiri Kosina <redacted>
Cc: <redacted>
Signed-off-by: Brian Norris <redacted>
---
v1 was a few months back. I finally got around to rewriting it based on
DT binding feedback.
v2:
* add compatible property for wacom
* name the regulator property specifically (VDD)
Documentation/devicetree/bindings/input/hid-over-i2c.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 488edcb264c4..eb98054e60c9 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -11,12 +11,16 @@ If this binding is used, the kernel module i2c-hid will handle the communication
with the device and the generic hid core layer will handle the protocol.
Required properties:
-- compatible: must be "hid-over-i2c"
+- compatible: must be "hid-over-i2c", or a device-specific string like:
+ * "wacom,w9013"
NACK on this one.
21 more quoted lines
Yes, there are bugs, quirks, even with HID. But the HID declares within
the protocol the Vendor ID and the Product ID, which means once we pass
the initial "device is ready" step and can do a single i2c write/read,
we don't give a crap about device tree anymore.
This is just about setting the device in shape so that it can answer a
single write/read.
This is no different than a panel attached via LVDS, eDP, etc., or
USB/PCIe device hard-wired on a board. They all use standard protocols
and all need additional data to describe them. Of course, adding a
single property for a delay would not be a big deal, but it's never
ending. Next you need multiple supplies, GPIO controls, mutiple
delays... This has been discussed to death already. As Thierry Reding
said, you're not special[1].
I can somewhat understand what you mean. The official specification is
for ACPI. And ACPI allows to calls various settings while querying the
_STA method for instance. So in the ACPI world, we don't need to care
about regulators or GPIOs because the OEM deals with this in its own
blob.
Now, coming back to our issue. We are not special, maybe, if he says so.
But this really feels like a design choice between putting the burden on
device tree and OEMs or in the module maintainers. And I'd rather have
the OEM deal with their device than me having to update the module for
each generations of hardware. Indeed, this looks like an "endless"
amount of quirks, but I'd rather have this endless amount of quirks than
having to maintain an endless amount of list of new devices that behaves
the same way. We are talking here about "wacom,w9013", but then comes
"wacom,w9014" and we need to upgrade the kernel.
I have dealt with that for the wacom modules for years, and this is
definitively not a good solution.
And one additional caveat of this solution is the time between the
release of the new device and its readiness in the hands of the
consumer. You need to push a patch upstream, then backport it or wait
for it to come to your distribution. While if there is a device tree
specific quirk, you just read the spec of the device and applies it to
your device tree and you are good to go.
So no, I don't buy this. If hardware makers want to have fancy way of
initializing their devices, we can cope with those, but I don't want to
do the Device Tree job in a kernel module were you need to recompile it
each time a new device appears.
Now if you want to make 'hid-over-i2c' a fallback to 'wacom,w9013', I'm
fine with that.
I agree to have some sort of quirks in the i2c-hid module, but
definitively not a list of devices with a specific initialization
sequence. Device Tree has also been introduced to remove the specific
platform devices, and you are basically asking us to go back there,
which I don't want.
Cheers,
Benjamin
Rob
[1] https://sietch-tagr.blogspot.de/2016/04/display-panels-are-not-special.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html