[PATCH] Input: touchscreen: w90p910 - change msleep to usleep_range for small msecs

msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, retry logic, etc.
Thus, change msleep to usleep_range for precise wakeups.

Signed-off-by: Aniroop Mathur <redacted>
---
 drivers/input/touchscreen/w90p910_ts.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index da6004e..3f14b5a 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c

@@ -171,9 +171,9 @@ static int w90p910_open(struct input_dev *dev)
 	clk_enable(w90p910_ts->clk);
 
 	__raw_writel(ADC_RST1, w90p910_ts->ts_reg);
-	msleep(1);
+	usleep_range(1000, 1100);
 	__raw_writel(ADC_RST0, w90p910_ts->ts_reg);
-	msleep(1);
+	usleep_range(1000, 1100);
 
 	/* set delay and screen type */
 	val = __raw_readl(w90p910_ts->ts_reg + 0x04);

-- 
2.6.2