[PATCH] Input: touchscreen: edt_ft5x06 - change msleep to usleep_range for small msecs
flat view
STALE3566d
From: Aniroop Mathur <hidden>
Date: 2016-11-28 18:32:41
Also in:
lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, the rest · Maintainers:
Dmitry Torokhov, Linus Torvalds
msleep(1~20) may not do what the caller intends, and will often sleep longer. (~20 ms actual sleep for any value given in the 1~20ms range) This is not the desired behaviour for many cases like device resume time, device suspend time, device enable time, retry logic, etc. Thus, change msleep to usleep_range for precise wakeups. Signed-off-by: Aniroop Mathur <redacted> --- drivers/input/touchscreen/edt-ft5x06.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 703e295..379dd31 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c@@ -67,7 +67,7 @@ #define EDT_SWITCH_MODE_RETRIES 10 #define EDT_SWITCH_MODE_DELAY 5 /* msec */ #define EDT_RAW_DATA_RETRIES 100 -#define EDT_RAW_DATA_DELAY 1 /* msec */ +#define EDT_RAW_DATA_DELAY 1000 /* usec */ enum edt_ver { M06,
@@ -664,7 +664,7 @@ static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file, } do { - msleep(EDT_RAW_DATA_DELAY); + usleep_range(EDT_RAW_DATA_DELAY, EDT_RAW_DATA_DELAY + 100); val = edt_ft5x06_register_read(tsdata, 0x08); if (val < 1) break;
--
2.6.2