From: Steve Twiss <redacted>

Device tree binding information for DA9062 and DA9061 thermal junction
temperature monitor.

Binding descriptions for the DA9061 and DA9062 thermal TJUNC supervisor
device driver, using a single THERMAL_TRIP_HOT trip-wire and allowing for a
configurable polling period for over-temperature polling.

Signed-off-by: Steve Twiss <redacted>

---
This patch applies against linux-next and v4.8

Hi,

This patch depends on the acceptance of the main code for the onkey:
  [PATCH V1 5/10] thermal: da9061: TJUNC temperature driver

Regards,
Steve Twiss, Dialog Semiconductor Ltd.


 .../devicetree/bindings/thermal/da9062-thermal.txt | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/da9062-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
new file mode 100644
index 0000000..338de2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt

@@ -0,0 +1,30 @@
+* Dialog DA9062/61 TJUNC Thermal Module
+
+This module is part of the DA9061/DA9062. For more details about entire
+DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
+
+Junction temperature thermal module uses an interrupt signal to identify
+high THERMAL_TRIP_HOT temperatures for the PMIC device.
+
+Required properties:
+
+- compatible: should be one of:
+        dlg,da9061-thermal
+        dlg,da9062-thermal
+
+Optional properties:
+
+- dlg,tjunc-temp-polling-period-ms : Specify the polling period, measured
+    in milliseconds, between thermal zone device update checks.
+
+Example:
+
+	pmic0: da9062@58 {
+
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			dlg,tjunc-temp-polling-period-ms = <3000>;
+		};
+
+	};
+

-- 
end-of-patch for PATCH V1