Re: [PATCH] Input: synaptics-rmi4: Fix maximum size check for F12 control register 8
flat view
From: Nitin Chaudhary <hidden>
Date: 2016-07-20 01:17:03
Also in:
lkml, stable
Tested on i.MX6Q Board with Synaptics 7813 Touch Controller, works fine. Tested by: Nitin Chaudhary [off-list ref] On Tue, Jul 19, 2016 at 4:43 PM, Andrew Duggan [off-list ref] wrote:
quoted hunk ↗ jump to hunk
According to the RMI4 spec the maximum size of F12 control register 8 is 15 bytes. The current code incorrectly reports an error if control 8 is greater then 14. Making sensors with a control register 8 with 15 bytes unusable. Signed-off-by: Andrew Duggan <redacted> Reported-by: Chris Healy <redacted> Cc: stable@vger.kernel.org --- drivers/input/rmi4/rmi_f12.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index c30fd86..9b0d9f7 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c@@ -68,7 +68,7 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) struct rmi_device *rmi_dev = fn->rmi_dev; int ret; int offset; - u8 buf[14]; + u8 buf[15]; int pitch_x = 0; int pitch_y = 0; int clip_x_low = 0;@@ -88,8 +88,9 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8); - if (item->reg_size > 14) { - dev_err(&fn->dev, "F12 control8 should be 14 bytes, not: %ld\n", + if (item->reg_size > 15) { + dev_err(&fn->dev, + "F12 control8 should be a maximum of 15 bytes, not: %ld\n", item->reg_size); return -ENODEV; } --2.7.4
On Tue, Jul 19, 2016 at 4:43 PM, Andrew Duggan [off-list ref] wrote:
quoted hunk ↗ jump to hunk
According to the RMI4 spec the maximum size of F12 control register 8 is 15 bytes. The current code incorrectly reports an error if control 8 is greater then 14. Making sensors with a control register 8 with 15 bytes unusable. Signed-off-by: Andrew Duggan <redacted> Reported-by: Chris Healy <redacted> Cc: stable@vger.kernel.org --- drivers/input/rmi4/rmi_f12.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index c30fd86..9b0d9f7 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c@@ -68,7 +68,7 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) struct rmi_device *rmi_dev = fn->rmi_dev; int ret; int offset; - u8 buf[14]; + u8 buf[15]; int pitch_x = 0; int pitch_y = 0; int clip_x_low = 0;@@ -88,8 +88,9 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8); - if (item->reg_size > 14) { - dev_err(&fn->dev, "F12 control8 should be 14 bytes, not: %ld\n", + if (item->reg_size > 15) { + dev_err(&fn->dev, + "F12 control8 should be a maximum of 15 bytes, not: %ld\n", item->reg_size); return -ENODEV; } --2.7.4
-- Thanks & Regards Nitin Chaudhary Nitin Chaudhary MS, Electrical Engineering University of Southern California Intern, Zodiac In-flight Innovations