It is possible that da9052_ts_input_open is called and the touchscreen
is triggering continuous interrupts. In this case we will never leave
da9052_ts_input_open. The da9052_reg_update will never get the i2c bus
as the interrupt handler will continuously lock it.
This patch switch places of da9052_reg_update and the setting of
tsi->stopped. This way its ensured that da9052_ts_input_open will never
lockup on interrupt flood.
Signed-off-by: Michael Grzeschik <redacted>
---
drivers/input/touchscreen/da9052_tsi.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
index 5a013bb..1b136b8 100644
--- a/drivers/input/touchscreen/da9052_tsi.c
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -189,17 +189,20 @@ static int da9052_configure_tsi(struct da9052_tsi *tsi)
static int da9052_ts_input_open(struct input_dev *input_dev)
{
+ int val;
struct da9052_tsi *tsi = input_get_drvdata(input_dev);
- tsi->stopped = false;
- mb();
+ val = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
+ 1 << 1, 1 << 1);
/* Unmask PEN_DOWN event */
da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+ tsi->stopped = false;
+ mb();
+
/* Enable Pen Detect Circuit */
- return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
- 1 << 1, 1 << 1);
+ return val;
}
static void da9052_ts_input_close(struct input_dev *input_dev)--
2.7.0