Re: [PATCH v3 03/10] Input: synaptics-rmi4: Add device tree support for RMI4 I2C devices

Add devicetree binding for I2C devices and add bindings for optional
parameters in the function drivers. Parameters for function drivers are
defined in child nodes for each of the functions.

Signed-off-by: Andrew Duggan <redacted>
---
 .../devicetree/bindings/input/rmi4/rmi_f01.txt     | 39 ++++++++++++++++
 .../devicetree/bindings/input/rmi4/rmi_i2c.txt     | 53 ++++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 drivers/input/rmi4/rmi_bus.c                       | 35 ++++++++++++++
 drivers/input/rmi4/rmi_bus.h                       |  4 --
 drivers/input/rmi4/rmi_driver.c                    | 28 ++++++++++++
 drivers/input/rmi4/rmi_f01.c                       | 50 ++++++++++++++++++++
 drivers/input/rmi4/rmi_i2c.c                       | 12 ++++-
 8 files changed, 217 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
 create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt

diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
new file mode 100644
index 0000000..096855c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt

@@ -0,0 +1,39 @@
+Synaptics RMI4 F01 Device Binding
+
+The Synaptics RMI4 core is able to support RMI4 devices using different
+transports and different functions. This file describes the device tree
+bindings for devices which contain Function 1. Complete documentation
+for transports and other functions can be found in:
+Documentation/devicetree/bindings/input/rmi4.
+
+Additional documentation for F01 can be found at:
+http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
+
+Optional Properties:
+- syna,nosleep-mode: If set the device will run at full power without sleeping.
+			nosleep has 3 modes, 0 will not change the default
+			setting, 1 will disable nosleep (allow sleeping),
+			and 2 will enable nosleep (disabling sleep).
+- syna,wakeup-threshold: Defines the amplitude of the disturbance to the
+				background capacitance that will cause the
+				device to wake from dozing.
+- syna,doze-holdoff-msec: The delay to wait after the last finger lift and the
+				first doze cycle.
+- syna,doze-interval-msec: The time period that the device sleeps between finger
+				activity.