On Mon, 14 Dec 2015, Markus Pargmann wrote:

This is the core driver for imx25 touchscreen/adc driver. The module
has one shared ADC and two different conversion queues which use the
ADC. The two queues are identical. Both can be used for general purpose
ADC but one is meant to be used for touchscreens.

This driver is the core which manages the central components and
registers of the TSC/ADC unit. It manages the IRQs and forwards them to
the correct components.

Signed-off-by: Markus Pargmann <redacted>
Signed-off-by: Denis Carikli <redacted>

[ensure correct ADC clock depending on the IPG clock]
Signed-off-by: Juergen Borleis <redacted>
Acked-by: Jonathan Cameron <redacted>
---

Notes:
    Changes in v7:
     - Cleanup bit defines in header files to be more readable
     - Fix irq check to return with an error for irq <= 0
     - Add COMPILE_TEST in Kconfig file
    
    Changes in v5:
     - Remove ifdef CONFIG_OF as this driver is only for DT usage
     - Remove module owner
     - Add Kconfig dependencies ARCH_MX25 and OF

 drivers/mfd/Kconfig             |   9 ++
 drivers/mfd/Makefile            |   2 +
 drivers/mfd/fsl-imx25-tsadc.c   | 203 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++
 4 files changed, 354 insertions(+)
 create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
 create mode 100644 include/linux/mfd/imx25-tsadc.h

For my own reference:
  Acked-by: Lee Jones [off-list ref]

I will apply this and sent out pull-requests to the relevant
maintainers once -rc1 is out.

[...]

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog