[PATCH 5/5] Input: tsc2005 - convert to gpiod
From: Sebastian Reichel <sre@kernel.org>
Date: 2015-07-22 20:05:39
Also in:
linux-omap, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, the rest · Maintainers:
Dmitry Torokhov, Linus Torvalds
The GPIOD API can be used from boardcode, so that the DT check can be removed. To avoid breaking existing boardcode, _optional() variant has been chosen. For completly removing the DT check, the regulator has also been made optional, so that it could be supplied from boardcode. As a side-effect the patch fixes the after-probe reset GPIO state, so that the device is not kept in reset state. Signed-off-by: Sebastian Reichel <sre@kernel.org> --- drivers/input/touchscreen/tsc2005.c | 47 ++++++++++++++----------------------- 1 file changed, 18 insertions(+), 29 deletions(-)
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index f82b860..bf1b782 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c@@ -30,11 +30,11 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/spi/spi.h> #include <linux/spi/tsc2005.h> #include <linux/regulator/consumer.h> #include <linux/regmap.h> +#include <linux/gpio/consumer.h> /* * The touchscreen interface operates as follows:
@@ -180,7 +180,7 @@ struct tsc2005 { struct regulator *vio; - int reset_gpio; + struct gpio_desc *reset_gpio; void (*set_reset)(bool enable); };
@@ -318,8 +318,8 @@ static void tsc2005_stop_scan(struct tsc2005 *ts) static void tsc2005_set_reset(struct tsc2005 *ts, bool enable) { - if (ts->reset_gpio >= 0) - gpio_set_value(ts->reset_gpio, enable); + if (ts->reset_gpio) + gpiod_set_value_cansleep(ts->reset_gpio, enable); else if (ts->set_reset) ts->set_reset(enable); }
@@ -611,34 +611,23 @@ static int tsc2005_probe(struct spi_device *spi) ts->x_plate_ohm = x_plate_ohm; ts->esd_timeout = esd_timeout; - if (np) { - ts->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0); - if (ts->reset_gpio == -EPROBE_DEFER) - return ts->reset_gpio; - if (ts->reset_gpio < 0) { - dev_err(&spi->dev, "error acquiring reset gpio: %d\n", - ts->reset_gpio); - return ts->reset_gpio; - } + ts->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + dev_err(&spi->dev, "error acquiring reset gpio: %d\n", error); + return error; + } - error = devm_gpio_request_one(&spi->dev, ts->reset_gpio, 0, - "reset-gpios"); - if (error) { - dev_err(&spi->dev, "error requesting reset gpio: %d\n", - error); - return error; - } + ts->vio = devm_regulator_get_optional(&spi->dev, "vio"); + if (IS_ERR(ts->vio)) { + error = PTR_ERR(ts->vio); + dev_err(&spi->dev, "vio regulator missing (%d)", error); + return error; + } - ts->vio = devm_regulator_get(&spi->dev, "vio"); - if (IS_ERR(ts->vio)) { - error = PTR_ERR(ts->vio); - dev_err(&spi->dev, "vio regulator missing (%d)", error); - return error; - } - } else { - ts->reset_gpio = -1; + if(!ts->reset_gpio && pdata) ts->set_reset = pdata->set_reset; - } mutex_init(&ts->mutex);
--
2.1.4