2015-05-28 14:58 GMT+03:00 Lee Jones [off-list ref]:

On Wed, 27 May 2015, Dmitry Eremin-Solenikov wrote:

quoted

2015-05-27 13:27 GMT+03:00 Lee Jones [off-list ref]:

quoted

On Mon, 25 May 2015, Dmitry Eremin-Solenikov wrote:

quoted

LoCoMo is a GA used on Sharp Zaurus SL-5x00. Current driver does has
several design issues (special bus instead of platform bus, doesn't use
mfd-core, etc).

Implement 'core' parts of locomo support as an mfd driver.

Signed-off-by: Dmitry Eremin-Solenikov <redacted>
---

These things are much easier to re-review if you keep a change-log
here.

quoted

 drivers/mfd/Kconfig        |  10 ++
 drivers/mfd/Makefile       |   1 +
 drivers/mfd/locomo.c       | 336 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/locomo.h | 169 +++++++++++++++++++++++
 4 files changed, 516 insertions(+)
 create mode 100644 drivers/mfd/locomo.c
 create mode 100644 include/linux/mfd/locomo.h

Looks good now though:
  Acked-by: Lee Jones [off-list ref]

How do you plan for this to be merged?

I'd like for this to be merged either through mfd tree or through the
arm-soc (or rmk's ARM) tree.
Some of the respective maintainers already gave their blessing for
this patchset to be merged
not through their subsystem trees.

I can take it through MFD.  Once you have all the required Acks,
resubmit the set with them all applied with a note in the cover-letter
to that affect and I'll apply.

Thank you. This is what I still miss:

* Russell, could you please review sa1100 parts?
* Jingoo, could you please review the backlight part?
* Mark, same question for the updated SPI driver.
* Linus, can I assume that yours 'Reviewed-by' mean
  'Acked-by' for the GPIO-related parts?

-- 
With best wishes
Dmitry