[PATCH v1 4/4] leds: no longer use unnamed gpios
From: Olliver Schinagl <hidden>
Date: 2015-01-07 09:09:35
Also in:
linux-devicetree, linux-gpio, linux-leds, lkml
Subsystem:
led subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Olliver Schinagl <redacted> The gpio document says we should not use unnamed bindings for gpios. This patch uses the 'led-' prefix to the gpios and updates code and documents. Because the devm_get_gpiod_from_child() falls back to using old-style unnamed gpios, we can update the code first, and update dts files as time allows. Signed-off-by: Olliver Schinagl <redacted> --- Documentation/devicetree/bindings/leds/leds-gpio.txt | 12 ++++++------ drivers/leds/leds-gpio.c | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index d544cf1..2c138cc 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt@@ -7,7 +7,7 @@ Each LED is represented as a sub-node of the gpio-leds device. Each node's name represents the name of the corresponding LED. LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "gpios property" in +- led-gpios : Should specify the LED's GPIO, see "gpios property" in Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be indicated using flags in the GPIO specifier. - label : (optional)
@@ -32,12 +32,12 @@ leds { compatible = "gpio-leds"; hdd { label = "IDE Activity"; - gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; + led-gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "ide-disk"; }; fault { - gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; + led-gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; /* Keep LED on if BIOS detected hardware fault */ default-state = "keep"; };
@@ -46,11 +46,11 @@ leds { run-control { compatible = "gpio-leds"; red { - gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>; + led-gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>; default-state = "off"; }; green { - gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; + led-gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; default-state = "on"; }; };
@@ -59,7 +59,7 @@ leds { compatible = "gpio-leds"; charger-led { - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + led-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "max8903-charger-charging"; retain-state-suspended; };
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 8e5af69..5b7bc84 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c@@ -184,7 +184,7 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev) struct gpio_led led = {}; const char *state = NULL; - led.gpiod = devm_get_gpiod_from_child(dev, NULL, child); + led.gpiod = devm_get_gpiod_from_child(dev, "led", child); if (IS_ERR(led.gpiod)) { fwnode_handle_put(child); goto err;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html