[PATCH v3 3/6] mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache save
From: Vignesh R <vigneshr@ti.com>
Date: 2014-11-11 08:36:52
Also in:
linux-arm-kernel, linux-devicetree, linux-iio, linux-omap, lkml
Subsystem:
multifunction devices (mfd), the rest · Maintainers:
Lee Jones, Linus Torvalds
In one shot mode, sequencer automatically disables all enabled steps at the end of each cycle. (both ADC steps and TSC steps) Hence these steps need not be saved in reg_se_cache for clearing these steps at a later stage. Also, when ADC wakes up Sequencer should not be busy executing any of the config steps except for the charge step. Previously charge step was 1 ADC clock cycle and hence it was ignored. Signed-off-by: Vignesh R <vigneshr@ti.com> --- drivers/mfd/ti_am335x_tscadc.c | 7 +++++-- include/linux/mfd/ti_am335x_tscadc.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index d877e777cce6..110038859a8d 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c@@ -86,8 +86,12 @@ static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc) spin_lock_irq(&tsadc->reg_lock); finish_wait(&tsadc->reg_se_wait, &wait); + /* + * Sequencer should either be idle or + * busy applying the charge step. + */ reg = tscadc_readl(tsadc, REG_ADCFSM); - WARN_ON(reg & SEQ_STATUS); + WARN_ON((reg & SEQ_STATUS) && !(reg & CHARGE_STEP)); tsadc->adc_waiting = false; } tsadc->adc_in_use = true;
@@ -96,7 +100,6 @@ static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc) void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val) { spin_lock_irq(&tsadc->reg_lock); - tsadc->reg_se_cache |= val; am335x_tscadc_need_adc(tsadc); tscadc_writel(tsadc, REG_SE, val);
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index c99be5dc0f5c..fcce182e4a35 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h@@ -128,6 +128,7 @@ /* Sequencer Status */ #define SEQ_STATUS BIT(5) +#define CHARGE_STEP 0x11 #define ADC_CLK 3000000 #define TOTAL_STEPS 16
--
1.9.1