On Fri, 24 Oct 2014, Dmitry Torokhov wrote:

On Mon, Oct 20, 2014 at 07:46:05AM +0100, Lee Jones wrote:

quoted

On Sat, 18 Oct 2014, Linus Walleij wrote:

quoted

This adds the register offsets for pull up/down for the STMPE
1601, 1801 and 24xx expanders. This is used to bias GPIO lines
and keypad lines.

Signed-off-by: Linus Walleij <redacted>
---
Hi Sam, Lee: I think you should just ACK this so Dmitry can take the
patch series through the input tree, where the registers need to be
used to enable the keypad on the STMPE2401.
---
 drivers/mfd/stmpe.c       | 4 ++++
 drivers/mfd/stmpe.h       | 3 +++
 include/linux/mfd/stmpe.h | 2 ++
 3 files changed, 9 insertions(+)

Does this need to go in with the other patches in the set?

I'm _guessing_ that, as you've sent them separately, they can be
applied separately?

This needs to go in via MFD, but for my own reference:

Acked-by: Lee Jones <redacted>

The new register definitions are needed for patch #3.  If you insist on
this going through MFD then please take the other 2 patches with my Ack
through MFD tree as well I do not think we need the whole song and dance
trying to synchronize 2 trees.

Actually, I can't see the other patches as they weren't sent to me.

Please apply them all to your tree with my Ack.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html