[PATCH 4/4] input: touchscreen: ti_am335x_tsc: Use charge delay DT parameter
From: Vignesh R <vigneshr@ti.com>
Date: 2014-10-27 11:10:24
Also in:
linux-arm-kernel, linux-devicetree, linux-iio, linux-omap, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, the rest · Maintainers:
Dmitry Torokhov, Linus Torvalds
This patch reads charge delay from tsc DT node and writes to REG_CHARGEDELAY register. If the charge delay is not specified in DT then default value of 0xB000(CHARGEDLY_OPENDLY) is used. Signed-off-by: Vignesh R <vigneshr@ti.com> --- drivers/input/touchscreen/ti_am335x_tsc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 483fd97c0e0c..20ce76b1b6e7 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c@@ -52,6 +52,7 @@ struct titsc { u32 bit_xp, bit_xn, bit_yp, bit_yn; u32 inp_xp, inp_xn, inp_yp, inp_yn; u32 step_mask; + u32 charge_delay; }; static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
@@ -177,7 +178,7 @@ static void titsc_step_config(struct titsc *ts_dev) config = titsc_readl(ts_dev, REG_IDLECONFIG); titsc_writel(ts_dev, REG_CHARGECONFIG, config); - titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY); + titsc_writel(ts_dev, REG_CHARGEDELAY, ts_dev->charge_delay); /* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */ config = STEPCONFIG_MODE_HWSYNC |
@@ -361,6 +362,11 @@ static int titsc_parse_dt(struct platform_device *pdev, if (err < 0) return err; + err = of_property_read_u32(node, "ti,charge-delay", + &ts_dev->charge_delay); + if (err < 0) + ts_dev->charge_delay = CHARGEDLY_OPENDLY; + return of_property_read_u32_array(node, "ti,wire-config", ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp)); }
--
1.9.1