Sergei
Thanks for the additional comments

On 08/21/2014 02:04 PM, Sergei Shtylyov wrote:

Hello.

On 08/21/2014 10:19 PM, Dan Murphy wrote:

quoted

DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators.
Adding dt binding for this part

quoted

Signed-off-by: Dan Murphy <redacted>
---
  .../devicetree/bindings/input/ti,drv2667.txt       |   18 ++++++++++++++++++
  1 file changed, 18 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt

quoted

diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
new file mode 100644
index 0000000..525216d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt

@@ -0,0 +1,18 @@
+Texas Instruments - drv2667 Haptics driver
+
+The drv2667 uses serial control bus communicates through I2C protocols
+
+Required properties:
+	- compatible - "ti,drv2667" - DRV2667
+	- reg -  I2C slave address
+	- vbat-supply - Required supply regulator
+
+Example:
+
+drv2667: drv2667@59 {

    The ePAPR standard [1] has something to say on this matter:

What is this reference?  Did not know this existed so wanted to read up on it.

I can change it to haptics or vibrator

"The name of a node should be somewhat generic, reflecting the function of the 
device and not its precise programming model."

quoted

+		compatible = "ti,drv2667";

    Indented too much to the right.

One tab to many.  Got it

quoted

+		reg = <0x59>;

    Still no "vbat-supply"... :-/

Still have not sent in v2 of the patch yet.  Waiting on other comments.

quoted

+};

[...]

WBR, Sergei

-- 
------------------
Dan Murphy