@@ -704,6 +704,8 @@ static char i8042_pnp_aux_name[32];
 
 static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
 {
+	struct pnp_id *id = dev->id;
+
 	if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1)
 		i8042_pnp_data_reg = pnp_port_start(dev,0);
 

@@ -719,6 +721,17 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
 		strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
 	}
 
+	if (id) {
+		strlcpy(i8042_kbd_firmware_id, id->id,
+			sizeof(i8042_kbd_firmware_id));
+		for (id = id->next; id; id = id->next) {
+			strlcat(i8042_kbd_firmware_id, " ",
+				sizeof(i8042_kbd_firmware_id));
+			strlcat(i8042_kbd_firmware_id, id->id,
+				sizeof(i8042_kbd_firmware_id));
+		}
+	}
+
 	/* Keyboard ports are always supposed to be wakeup-enabled */
 	device_set_wakeup_enable(&dev->dev, true);
 

@@ -728,6 +741,8 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
 
 static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
 {
+	struct pnp_id *id = dev->id;
+
 	if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1)
 		i8042_pnp_data_reg = pnp_port_start(dev,0);
 

@@ -743,6 +758,17 @@ static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *
 		strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
 	}
 
+	if (id) {
+		strlcpy(i8042_aux_firmware_id, id->id,
+			sizeof(i8042_aux_firmware_id));
+		for (id = id->next; id; id = id->next) {
+			strlcat(i8042_aux_firmware_id, " ",
+				sizeof(i8042_aux_firmware_id));
+			strlcat(i8042_aux_firmware_id, id->id,
+				sizeof(i8042_aux_firmware_id));
+		}
+	}
+
 	i8042_pnp_aux_devices++;
 	return 0;
 }

@@ -87,6 +87,8 @@ MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
 #endif
 
 static bool i8042_bypass_aux_irq_test;
+static char i8042_kbd_firmware_id[128];
+static char i8042_aux_firmware_id[128];
 
 #include "i8042.h"
 

@@ -1218,6 +1220,8 @@ static int __init i8042_create_kbd_port(void)
 	serio->dev.parent	= &i8042_platform_device->dev;
 	strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
 	strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
+	strlcpy(serio->firmware_id, i8042_kbd_firmware_id,
+		sizeof(serio->firmware_id));
 
 	port->serio = serio;
 	port->irq = I8042_KBD_IRQ;

@@ -1244,6 +1248,8 @@ static int __init i8042_create_aux_port(int idx)
 	if (idx < 0) {
 		strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
 		strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+		strlcpy(serio->firmware_id, i8042_aux_firmware_id,
+			sizeof(serio->firmware_id));
 		serio->close = i8042_port_close;
 	} else {
 		snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);