Thread (5 messages) 5 messages, 2 authors, 2014-01-06

Re: T440s Synaptics clickpad: lost sync / KBC bad data

From: J. Domburg <hidden>
Date: 2013-12-21 23:17:10

On Sat, 21 Dec 2013, Heinz Wiesinger wrote:
J. Domburg <jeroen <at> spritesmods.com> writes:
I'm experiencing exactly the same issue. I have my T440s now for a bit more
than two weeks. No issues with the touchpad until today when it suddenly
started acting up and I now see messages like these in dmesg
<snip>

Hi Heinz, all,

Always good to know mine is not an isolated case, although in this case, I 
wouldn't want to wish the issue on anyone else...

FYI: I haven't resolved this issue yet, but I'm thinking this may be a 
hardware issue after all. I decided to try and see if Win7 has this issue 
too, and got myself an USB-stick to install it from. I didn't even get 
past the installer. It gave me exactly the same issues as Linux has: 
an erratic and finally hanging cursor when using the clickpad.

I can understand Lenovo not wanting to support a Linux-only-issue so up 
till now I haven't bothered them yet with my issue, but I can't see my 
laptop not having mouse support in something as commonly used and 
well-supported by hardware manufacturers as the Win7 installer. This 
smells like an hardware issue to me, so I filed a warranty case today.

If people here don't mind, I'll keep the list updated, if anything so 
other people running into the same issues will have a reference and know 
this isn't necessarily a kernel thing.

Depending on how Lenovo reacts, I'll either have a working laptop or a 
good reason to go soldering and probing the i2c bus. In any case, I should 
end up with a solution I'd think :) although it'd be good if someone more 
versed in the i8042 and related things would look over my shoulder in the 
latter case.

Cheers,
Jeroen
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help