[PATCH v2 0/2] new USB eBeam input driver

Hi,

New USB input driver for eBeam devices.

Currently supported (tested) :
- Luidia eBeam classic projection and edge projection models
- Nec "interactive solution" NP01Wi1 & NP01Wi2 accessories.

From basic usb point of view, all these devices are

indistinguishable : they have the same usb ids and (blank) hid
report descriptors. There's other re-branded hardware that need to be
test, but i bet on same ids.

Patch 1 to blacklist the devices for hid generic-usb.

Patch 2 is the actual driver.

Notable stuff :
- use div64_s64 for portable 64/64-bits divisions.
- 13 sysfs custom files : 9 values for the transformation matrix,
  4 for xy ranges and a calibration trigger.

The module run fine since 3.3.6 kernel, both x86_32 and 64, actually
run in production on a 3.8.13 and compile without errors on
today's linus tree.

Changes from v1 -> v2:
- fix sysfs/input creation race in ebeam_probe
- use get_unaligned_le16 macro in ebeam_read_data
- move usb_kill_urb after usb_autopm_get_interface in ebeam_close
- remove reset_resume(), use resume() in reset_resume entry

Thanks for your help.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html