Hello,

I have a Posiflex 7215 POS system which has a USB touchscreen controller
onboard. I've done a kernel update from 2.6.35.4 to 3.9.4 and the touch
stopped working correctly. I tried with the generic usb hid driver, the
usbtouchscreen driver doesn't support this usb id. Evtest says:


# evtest /dev/input/event4
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0xd3a product 0xa000 version 0x110
Input device name: "Posiflex Inc. USB TOUCH V390"
Supported events:
  Event type 0 (Sync)
  Event type 1 (Key)
    Event code 272 (LeftBtn)
    Event code 273 (RightBtn)
    Event code 274 (MiddleBtn)
  Event type 3 (Absolute)
    Event code 0 (X)
      Value   2184
      Min        0
      Max     4095
    Event code 1 (Y)
      Value   3801
      Min        0
      Max     4095
  Event type 4 (Misc)
    Event code 4 (ScanCode)
Testing ... (interrupt to exit)

Event: time 1371798299.337455, type 3 (Absolute), code 0 (X), value 1596
Event: time 1371798299.337455, type 3 (Absolute), code 1 (Y), value 1969
Event: time 1371798299.337455, -------------- Report Sync ------------


There is no indication of pressure, so X is moving the cursor, but not
reporting anything pressed. With 2.6.35.4, there was a LeftBtn event
sent with each report block. Now it's gone.

What to do to make it work again?


Kind regards

	Jan