Shawn Guo wrote:

On Wed, Aug 15, 2012 at 06:31:47PM +0800, Hui Wang wrote:
  

quoted

The egalax_ts driver needs to get the gpio number of the irq pin,
and use this gpio to wake up the controller. So add a note
for this change.

Signed-off-by: Hui Wang <redacted>
---
 .../bindings/input/touchscreen/egalax-ts.txt       |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 0000000..df70318
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
    

Since we define this in the binding anyway, can we have an corresponding
.of_match_table in the driver?

Regards,
Shawn

  

OK, will add it in the driver.

Regards,
Hui.