[PATCH 0/2] Input: egalax_ts: parse devicetree to get gpio

eeti touch screen controller is an external chip for most platforms,
it connect to CPU via i2c bus, and it has a irq request pin need to be
connected to a gpio of the CPU, this irq request pin also act as a
wake up signal for touch screen controller, we need to get this gpio
number and operate it to wake up the controller, the old way to get
gpio is irq_to_gpio(), this API is dying and most platforms don't support
it, we change it to a more generic way to use devcietree.


Hui Wang (2):
  Input: egalax_ts: get gpio from devicetree node
  Input: add devicetree binding note for egalax_ts

 .../bindings/input/touchscreen/egalax-ts.txt       |   17 +++++++++++++++++
 drivers/input/touchscreen/egalax_ts.c              |   12 ++++++++++--
 2 files changed, 27 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

-- 
1.7.6