Re: [PATCH] input: Force Sentelic reconnect when mode setting has failed

On Mon, May 21, 2012 at 11:22:07PM +0800, Tai-hwa Liang wrote:

On Sat, 19 May 2012, Matthew Garrett wrote:

quoted

The Sentelic touchpad in an Asus UX-21 failed to work since the native
driver was merged. Examination showed that the FSP_REG_SWC1 register had
reverted back to 0x80 and so the pad was sending normal packets despite
the driver expecting absolute ones.

   Sounds to me that the hardware was reset, which usually happens if
there's intermittent power failure events.  Is there any particular step
to reproduce this unexpected resetting?

None that I've identified. It only seems to do it once, and afterwards 
it's fine. I agree that this seems to be covering up some more insidious 
bug, but I spent most of Friday and Saturday failing to find one.

-- 
Matthew Garrett | mjg59@srcf.ucam.org