Hi Christopher,

On Fri, Mar 16, 2012 at 02:53:33PM -0400, Christopher Hudson wrote:

---------- Forwarded message ----------
From: <redacted>
Date: Fri, Feb 3, 2012 at 10:27 AM
Subject: [PATCH 1/1] input: kxtj9: who_am_i check value and initial data
rate fixes
To: linux-input@vger.kernel.org
Cc: dmitry.torokhov@gmail.com, chris.hudson.comp.eng@gmail.com, Chris
Hudson [off-list ref]

From: Chris Hudson <redacted>

Several fixes based on customer feedback:
- WHO_AM_I value has changed since preliminary parts used for initial
testing
- Output of le16_to_cpu must be saved to memory before shifting to preserve
sign
- Initial data rate was not extracted from data control register init.
 This was
 causing the initial data rate to be set to maximum until it was changed.
 To
 fix this problem, it made more sense to specify an initial data rate and
 extract the register mask from that.

Signed-off-by: Chris Hudson <redacted>

Your mailer messed up the patch (tabs converted to spaces, lines wrapped
up). I fixed it up and applied but please use proper MTA next time
around.

Thanks.

-- 
Dmitry