Input: cyttsp - add support for Cypress TTSP touchscreen SPI bus interface

Started by unknown sender on Oct 15, 2011

Subsystems (3)

Maintainers (3)

DORMANTno replies

open the first message on its own page

Message details and related content
From: Javier Martinez Canillas <redacted>

The driver is composed of a core driver that process the data sent by
the contacts and a set of bus specific interface modules.

This patch add supports for the Cypress TTSP SPI bus interface.

Signed-off-by: Javier Martinez Canillas <redacted>
---

v2: Fix issues called out by Dmitry Torokhov
     - Extract the IRQ from the spi client data and pass to cyttsp_core_init()
     - Remove the extra retries and limit the retries to the cyttsp_core.c
       read/write block functions.
     - Cleanup cyttsp_spi_xfer(), check ACK in write operation and fix special
       EIO case to show its meaning.

v3: Fix issues called out by Henrik Rydberg and Mohan Pallaka
    - Remove bus type info since it is not used.

 drivers/input/touchscreen/cyttsp/cyttsp_spi.c |  295 +++++++++++++++++++++++++
 1 files changed, 295 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/touchscreen/cyttsp/cyttsp_spi.c
diff --git a/drivers/input/touchscreen/cyttsp/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp/cyttsp_spi.c
new file mode 100644
index 0000000..66d6dc3
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp/cyttsp_spi.c
@@ -0,0 +1,295 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011 Javier Martinez Canillas <martinez.javier@gmail.com>
+ *
+ * Multi-touch protocol type B support and cleanups by Javier Martinez Canillas
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/spi/spi.h>
+#include <linux/delay.h>
+
+#define CY_SPI_WR_OP      0x00 /* r/~w */
+#define CY_SPI_RD_OP      0x01
+#define CY_SPI_CMD_BYTES  4
+#define CY_SPI_SYNC_BYTE  2
+#define CY_SPI_SYNC_ACK1  0x62 /* from protocol v.2 */
+#define CY_SPI_SYNC_ACK2  0x9D /* from protocol v.2 */
+#define CY_SPI_DATA_SIZE  128
+#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+#define CY_SPI_BITS_PER_WORD 8
+
+struct cyttsp_spi {
+	struct cyttsp_bus_ops bus_ops;
+	struct spi_device *spi_client;
+	void *ttsp_client;
+	u8 wr_buf[CY_SPI_DATA_BUF_SIZE];
+	u8 rd_buf[CY_SPI_DATA_BUF_SIZE];
+};
+
+static int cyttsp_spi_xfer(u8 op, struct cyttsp_spi *ts,
+			   u8 reg, u8 *buf, int length)
+{
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = ts->wr_buf;
+	u8 *rd_buf = ts->rd_buf;
+	int retval;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_dbg(ts->bus_ops.dev,
+			"%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE);
+
+	wr_buf[0] = 0x00; /* header byte 0 */
+	wr_buf[1] = 0xFF; /* header byte 1 */
+	wr_buf[2] = reg;  /* reg index */
+	wr_buf[3] = op;   /* r/~w */
+	if (op == CY_SPI_WR_OP)
+		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+
+	memset((void *)xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	if (op == CY_SPI_WR_OP) {
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+	} else if (op == CY_SPI_RD_OP) {
+		xfer[0].len = CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+	}
+
+	retval = spi_sync(ts->spi_client, &msg);
+	if (retval < 0) {
+		dev_dbg(ts->bus_ops.dev,
+			"%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if ((rd_buf[CY_SPI_SYNC_BYTE] == CY_SPI_SYNC_ACK1) &&
+	    (rd_buf[CY_SPI_SYNC_BYTE+1] == CY_SPI_SYNC_ACK2))
+		retval = 0;
+	else {
+		int i;
+		for (i = 0; i < (CY_SPI_CMD_BYTES); i++)
+			dev_dbg(ts->bus_ops.dev,
+				"%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < (length); i++)
+			dev_dbg(ts->bus_ops.dev,
+				"%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		/* signal ACK error so silent retry */
+		retval = 1;
+	}
+
+	return retval;
+}
+
+static s32 ttsp_spi_read_block_data(void *handle, u8 addr,
+				    u8 length, void *data)
+{
+	struct cyttsp_spi *ts =
+		container_of(handle, struct cyttsp_spi, bus_ops);
+	int retval;
+
+	retval = cyttsp_spi_xfer(CY_SPI_RD_OP, ts, addr, data, length);
+	if (retval < 0)
+		pr_err("%s: ttsp_spi_read_block_data failed\n",
+		       __func__);
+
+	/*
+	 * Do not print the above error if the data sync bytes were not found.
+	 * This is a normal condition for the bootloader loader startup and need
+	 * to retry until data sync bytes are found.
+	 */
+	if (retval > 0)
+		retval = -EIO;  /* now signal fail; so retry can be done */
+
+	return retval;
+}
+
+static s32 ttsp_spi_write_block_data(void *handle, u8 addr,
+				     u8 length, const void *data)
+{
+	struct cyttsp_spi *ts =
+		container_of(handle, struct cyttsp_spi, bus_ops);
+	int retval;
+
+	retval = cyttsp_spi_xfer(CY_SPI_WR_OP, ts, addr, (void *)data, length);
+	if (retval < 0)
+		pr_err("%s: ttsp_spi_write_block_data failed\n",
+		       __func__);
+
+	/*
+	 * Do not print the above error if the data sync bytes were not found.
+	 * This is a normal condition for the bootloader loader startup and need
+	 * to retry until data sync bytes are found.
+	 */
+	if (retval > 0)
+		retval = -EIO;  /* now signal fail; so retry can be done */
+
+	return retval;
+}
+
+static s32 ttsp_spi_tch_ext(void *handle, void *values)
+{
+	struct cyttsp_spi *ts =
+		container_of(handle, struct cyttsp_spi, bus_ops);
+	int retval = 0;
+
+	/*
+	 * TODO: Add custom touch extension handling code here
+	 * set: retval < 0 for any returned system errors,
+	 *	retval = 0 if normal touch handling is required,
+	 *	retval > 0 if normal touch handling is *not* required
+	 */
+
+	if (!ts || !values)
+		retval = -EINVAL;
+
+	return retval;
+}
+
+static int __devinit cyttsp_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp_spi *ts;
+	int retval;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	retval = spi_setup(spi);
+	if (retval < 0) {
+		dev_dbg(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, retval);
+		return retval;
+	}
+
+	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+	if (!ts) {
+		dev_dbg(&spi->dev, "%s: Error, kzalloc\n", __func__);
+		return -ENOMEM;
+	}
+
+	ts->spi_client = spi;
+	dev_set_drvdata(&spi->dev, ts);
+	ts->bus_ops.write = ttsp_spi_write_block_data;
+	ts->bus_ops.read = ttsp_spi_read_block_data;
+	ts->bus_ops.ext = ttsp_spi_tch_ext;
+	ts->bus_ops.dev = &spi->dev;
+
+	ts->ttsp_client = cyttsp_core_init(&ts->bus_ops, &spi->dev, spi->irq);
+	if (IS_ERR(ts->ttsp_client)) {
+		int retval = PTR_ERR(ts->ttsp_client);
+		kfree(ts);
+		return retval;
+	}
+
+	dev_dbg(ts->bus_ops.dev, "%s: Registration complete\n", __func__);
+
+	return 0;
+}
+
+static int __devexit cyttsp_spi_remove(struct spi_device *spi)
+{
+	struct cyttsp_spi *ts = dev_get_drvdata(&spi->dev);
+
+	cyttsp_core_release(ts->ttsp_client);
+	kfree(ts);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int cyttsp_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct cyttsp_spi *ts = dev_get_drvdata(&spi->dev);
+
+	return cyttsp_suspend(ts->ttsp_client);
+}
+
+static int cyttsp_spi_resume(struct spi_device *spi)
+{
+	struct cyttsp_spi *ts = dev_get_drvdata(&spi->dev);
+
+	return cyttsp_resume(ts->ttsp_client);
+}
+#endif
+
+static struct spi_driver cyttsp_spi_driver = {
+	.driver = {
+		.name = CY_SPI_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = cyttsp_spi_probe,
+	.remove = __devexit_p(cyttsp_spi_remove),
+#ifdef CONFIG_PM
+	.suspend = cyttsp_spi_suspend,
+	.resume = cyttsp_spi_resume,
+#endif
+};
+
+static int __init cyttsp_spi_init(void)
+{
+	return spi_register_driver(&cyttsp_spi_driver);
+}
+module_init(cyttsp_spi_init);
+
+static void __exit cyttsp_spi_exit(void)
+{
+	spi_unregister_driver(&cyttsp_spi_driver);
+}
+module_exit(cyttsp_spi_exit);
+
+MODULE_ALIAS("spi:cyttsp");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+
-- 
1.7.4.1
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help