Re: [RFC PATCH] Only process ABS_MT_SLOT where there are slots available

Hi Antonio,

On Thu, Aug 18, 2011 at 12:28:53PM +0200, Antonio Ospite wrote:

This fixes the case when a non-multitouch device happens to have a HID
code equal to ABS_MT_SLOT, like the Sony Sixaxis has for the left dpad
analog control.

Signed-off-by: Antonio Ospite <redacted>
Cc: Simon Wood <redacted>
Cc: Henrik Rydberg <redacted>
Cc: virtuousfox@gmail.com
---

Hi,

following up from the discussion at 
http://thread.gmane.org/gmane.linux.kernel.input/19632 I've come up with this 
workaround to make the dpad left analog axis of the Sony Sixaxis controller 
working. What happens is that this button has a code of 0x2f (ABS_MT_SLOT) 
which gets some special handling regardless of the device being a multitouch one 
or not.

I do not know anything about multitouch devices, so I am not sure if this 
hack may break something else, I'd like some advice here.

Another possibility could be to remap the code at the HID level for the 
Sixaxis only, Simon you suggested this, are you willing to do that if this 
will be the preferred way? My HID-fu is way worse than yours and It'll take a 
lot more time for me.

No, drivers should not be emitting ABS_MT_SLOT if they are not
multitouch devices and not using MT-B protocol. You'll have to remap the
axis into something more suitable.

Thanks,
Dmitry

-- 
Dmitry