Thread (2 messages) 2 messages, 2 authors, 2011-08-24

Re: [PATCH] Input: imx_keypad: Provide PM support

flat view

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: 2011-08-24 06:53:59

Hi Fabio,

On Fri, Aug 19, 2011 at 12:56:04PM -0300, Fabio Estevam wrote:
Provide PM support to imx_keypad and allow the keypad to be used as a wakeup source.

Tested on a mx27_3ds, which wakes up via keypad press.

Signed-off-by: Fabio Estevam <redacted>
---

If I put disable_irq_wake(keypad->irq) inside imx_keypad_resume
like other keyboard drivers do I get the following:

mx27# echo mem > /sys/power/state                                               
PM: Syncing filesystems ... done.                                               
Freezing user space processes ... (elapsed 0.01 seconds) done.                  
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.             
Suspending console(s) (use no_console_suspend to debug)                         
PM: suspend of devices complete after 0.692 msecs                               
PM: late suspend of devices complete after 0.418 msecs                          
PM: early resume of devices complete after 0.179 msecs                          
------------[ cut here ]------------                                            
WARNING: at kernel/irq/manage.c:510 irq_set_irq_wake+0xdc/0xec()                
Unbalanced IRQ 21 wake disable
You need to figure out who else messes up with wakeup count on that IRQ.
The calls to enable_irq_wake() and disable_irq_wake() should be
balanced.
 
+#ifdef CONFIG_PM
Make it CONFIG_PM_SLEEP - we don't do runtime PM here.
quoted hunk ↗ jump to hunk
+static int imx_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct imx_keypad *keypad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(keypad->irq);
+
+	return 0;
+}
+
+static int imx_keypad_resume(struct device *dev)
+{
+	return 0;
+}
+
+static const struct dev_pm_ops imx_keypad_pm_ops = {
+	.suspend	= imx_keypad_suspend,
+	.resume		= imx_keypad_resume,
+};
+#endif
Just say

static SIMPLE_DEV_PM_OPS(imx_keypad_pm_ops,
			 imx_keypad_suspend, imx_keypad_resume);

And you won't need ifdefing assignment to pm below.
quoted hunk ↗ jump to hunk
 static int __devinit imx_keypad_probe(struct platform_device *pdev)
 {
 	const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
@@ -571,6 +593,9 @@ static struct platform_driver imx_keypad_driver = {
 	.driver		= {
 		.name	= "imx-keypad",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &imx_keypad_pm_ops,
+#endif
 	},
 	.probe		= imx_keypad_probe,
 	.remove		= __devexit_p(imx_keypad_remove),
-- 
1.6.0.4
Thanks.

-- 
Dmitry
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help