Re: [PATCH] input: mpr121: improve sensibility of touch key.

On Thu, Jun 30, 2011 at 12:34:41AM +0800, Zhang Jiejing wrote:

From: Jiejing Zhang <redacted>

There was an Quick Charge bit in Electrode conf register
should be set in init function, this bit was missed in
chip's document, which may cause touch controller charge
too slow to generate an interrupt.

Also, adjust the default vlaue of touch and release threshold
to make touch key more sensitive, this fix touch may not sensitive
after setup with plastic case.

Signed-off-by: Jiejing Zhang <redacted>

Applied, thanks Zhang.

-- 
Dmitry