Re: [v2] input: wacom - Pass touch resolution to clients through input_absinfo

On Tue, Jan 25, 2011 at 2:02 AM, Henrik Rydberg [off-list ref] wrote:

On Mon, Jan 24, 2011 at 11:06:13PM -0000, Ping Cheng wrote:

quoted

Fixed the workaround used for kernels older than 2.6.35.

Signed-off-by: Ping Cheng <redacted>

---
drivers/input/tablet/wacom_wac.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

A define or a function would have been nicer than "100", but since
this wasn't obvious from the comments,

I'll make a version 3 to add a function with comments since I need to
remove RX/RY from this patch anyway.

Reviewed-by: Henrik Rydberg <redacted>

Thank you.

Ping

Thanks,
Henrik

quoted

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index f44c822..12d5ccf 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c

@@ -1228,8 +1228,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,

      case TABLETPC:
              if (features->device_type == BTN_TOOL_DOUBLETAP ||
                  features->device_type == BTN_TOOL_TRIPLETAP) {
-                     input_set_abs_params(input_dev, ABS_RX, 0, features->x_phy, 0, 0);
-                     input_set_abs_params(input_dev, ABS_RY, 0, features->y_phy, 0, 0);
+                     /* set touch resolution in points/mm */
+                     input_abs_set_res(input_dev, ABS_X,
+                             100 * features->x_max / features->x_phy);
+                     input_abs_set_res(input_dev, ABS_Y,
+                             100 * features->y_max / features->y_phy);
                      __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
              }

@@ -1272,6 +1275,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,

                      input_set_abs_params(input_dev, ABS_MT_PRESSURE,
                                           0, features->pressure_max,
                                           features->pressure_fuzz, 0);
+                     /* set touch resolution in points/mm */
+                     input_abs_set_res(input_dev, ABS_X,
+                             100 * features->x_max / features->x_phy);
+                     input_abs_set_res(input_dev, ABS_Y,
+                             100 * features->y_max / features->y_phy);
              } else if (features->device_type == BTN_TOOL_PEN) {
                      __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
                      __set_bit(BTN_TOOL_PEN, input_dev->keybit);

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html