[PATCH v2 0/5] add tnetv107x input drivers

Texas Instruments' TNETV107X is an ARM1176 based SoC, with on-chip
touchscreen and keypad controllers.  This patch series adds drivers for these
controllers.

Changes between v1 and v2:
  1. Cleaned up platform data needs by reusing matrix keypad pdata
  2. Eliminated calibration code from touch driver
  3. Relocated h/w init code to open and close
  4. Other minor cleanups

Cyril Chemparathy (5):
  input: add driver for tnetv107x on-chip keypad controller
  davinci: add tnetv107x keypad platform device
  davinci: add keypad config for tnetv107x evm board
  input: add driver for tnetv107x touchscreen controller
  davinci: add tnetv107x touchscreen platform device

 arch/arm/mach-davinci/board-tnetv107x-evm.c    |   56 ++++
 arch/arm/mach-davinci/devices-tnetv107x.c      |   50 +++
 arch/arm/mach-davinci/include/mach/tnetv107x.h |    3 +
 drivers/input/keyboard/Kconfig                 |    9 +
 drivers/input/keyboard/Makefile                |    1 +
 drivers/input/keyboard/tnetv107x-keypad.c      |  329 +++++++++++++++++++
 drivers/input/touchscreen/Kconfig              |    9 +
 drivers/input/touchscreen/Makefile             |    1 +
 drivers/input/touchscreen/tnetv107x-ts.c       |  401 ++++++++++++++++++++++++
 9 files changed, 859 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/keyboard/tnetv107x-keypad.c
 create mode 100644 drivers/input/touchscreen/tnetv107x-ts.c